1～30 item / All 30 items
設備の異常を電話音声・SMSで通知。1台で防犯・水位・温度・停電など複数の監視用途に対応
『WhiteLock21MM』は、各種センサや制御盤、漏電検知器からの 入力信号をもとにした異常検知と、音声通話・SMSによる通報に対応した装置です。 通報先は、音声通話先を6箇所・SMSの送信先を6箇所の計12箇所まで指定可能。 固定電話や携帯電話から本製品に電話をかけて状態を確認することも可能です。 1台で8点の入力信号に対応し、防犯・水位・温度・停電などの監視用途に活用可能。 ニーズに合わせた遠隔監視体制の構築と異常の早期把握を支援します。 【特長】 ■LTE通信を利用した遠隔監視に対応 ■設備やセンサーの異常を電話・SMSで通報 ■通報先ごとに、監視する入力信号を選択可能 ■本体は約335gの軽量・コンパクト設計。制御盤内への組み込みや壁かけも容易 ※詳しくは＜カタログをダウンロード＞より資料をご覧ください。 お問い合わせもお気軽にどうぞ。
When flooding occurs, simply wiring the reporting device allows for remote monitoring 24 hours a day, 365 days a year.
Do you have any of these concerns? - In underpasses (subways) that go under roads and railways, it is necessary to alert pedestrians and vehicles of danger when flooding occurs. - Especially during localized heavy rain (guerrilla rain), it is important to respond quickly and accurately to alert drivers on-site to prevent accidents such as vehicle submersion. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring the alarm signal from the water level gauge to the reporting device (WhiteLock), remote monitoring is possible 24 hours a day, 365 days a year. ◇ The alarm signal can be transmitted using specific low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
To facilitate the early detection of miscaptures, when the door of the box trap closes, it receives a signal and can notify the designated contact.
Do you have any of these concerns? - It allows for early detection if the box trap closes while empty or in the case of accidental captures. - If utilizing for meat, it enables rapid processing from capture. The notification device (WhiteLock21MM) fundamentally solves these issues. ◇ When the door of the box trap closes, it receives a contact signal and can notify a pre-set contact via "voice notification" or "SMS notification." ◇ Since you can understand the status of the box trap, it is expected to reduce the effort required for patrols and improve operational efficiency. *For more details, please view the materials by downloading the catalog. Feel free to contact us with any inquiries.
By simply wiring the alarm signal to the reporting device, it is possible to monitor the cubicle and alleviate concerns about malfunctions and power outages.
Do you have any of these concerns? - When high-voltage receiving equipment fails and causes a power outage, not only are the costs for equipment repairs incurred, but in factories and similar settings, production stops, leading to additional losses. - Therefore, it is essential to monitor for leakage, power outages, and failures 24/7. The reporting device (WhiteLock) fundamentally resolves these issues. ◇ By simply wiring alarm signals (leakage, insulation, power outage, transformer overheating) from within the cubicle to the reporting device (WhiteLock), it enables 24/7, 365-day monitoring of the cubicle. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. * For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
You can monitor the abnormality of the dialysis device simply by wiring the alarm signal from the dialysis device to the reporting device.
Do you have any of these concerns? - If an abnormality occurs in the dialysis fluid supply device or RO device, immediate action is necessary. - Additionally, by quickly responding to abnormalities after dialysis operations at unmanned clinics at night, you can ensure a smooth start to the dialysis operations the following morning. The reporting device (WhiteLock) fundamentally resolves these issues. ◇ By simply wiring the alarm signals from the dialysis device to the reporting device (WhiteLock), you can monitor 24 hours a day, 365 days a year. ◇ The alarm signals can also be transmitted using specific low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the <Catalog>. Feel free to contact us with any inquiries.
The White Lock (reporting device) receives alarm signals for high temperatures, low temperatures, malfunctions, and power outages, and reports them.
Do you have any of these concerns? - You can monitor the temperature of food that requires a constant temperature for 24 hours. - You want to respond to temperature anomaly alarms and malfunction alarms from food showcases. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring the alarm signals (temperature, power outage, malfunction) from the food showcase (food storage device) to the reporting device (WhiteLock), you can monitor the temperature of food that requires a constant temperature for 24 hours. ◇ The alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
By wiring the alarm signal from the demand monitoring device to the reporting device, you can monitor demand 24 hours a day.
Do you have any of these concerns? - The basic electricity charge is determined by the contracted power, which is updated based on the demand value (maximum demand power). - If the electricity usage exceeds the contracted power, you will have to pay an excess charge or your contracted rate will increase. - Therefore, it is important to monitor demand to avoid exceeding the contracted power. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring the alarm signals from the demand monitoring device to the reporting device (WhiteLock), you can monitor demand 24 hours a day, 365 days a year. ◇ The alarm signals can also be transmitted using specific low-power radio to any location with a telephone line. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
By simply wiring the alarm signals from the equipment to the reporting device, 24-hour monitoring of the equipment can be achieved.
Do you have any of these concerns? - In buildings or apartments, failures or power outages of electrical (lighting and power supply) equipment, air conditioning systems, and water supply and drainage systems require immediate response. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals (failures, power outages) from equipment to the reporting device (WhiteLock), you can monitor the equipment 24 hours a day, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
It is very troublesome when there is not enough hot water available when needed at the hot spring facility.
Do you have any of these concerns? - Investigating the cause after something runs out takes time for recovery. - It is necessary to constantly monitor the condition of the entire equipment. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals (power outages, malfunctions) from each measuring device (water level gauge, flow meter), pumps, and boilers to the reporting device (WhiteLock), hot spring facilities can be monitored remotely 24 hours a day, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
Livestock buildings such as chicken coops, pigsties, and cattle barns have an optimal temperature range for healthy living, making temperature and humidity management important.
Do you have any of these concerns? - Managing temperature and humidity requires monitoring equipment such as ventilation fans and heating devices. - Temperature sensors, power outages, and ventilation fan failure alarm signals are received and reported by WhiteLock (the reporting device). The reporting device (WhiteLock) fundamentally resolves these issues. ◇ By simply wiring alarm signals (temperature, humidity, ventilation fan and other equipment failures, power outages) from within the livestock barn to the reporting device (WhiteLock), you can remotely monitor environmental conditions 24 hours a day, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
It is important to detect equipment failures and troubles early to minimize the impact on operations.
Do you have any of these concerns? - Early response is necessary for equipment failures or stoppages during unmanned nights and holidays. - This is Factory A. A failure alarm has been triggered. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals (failure, power outage) from equipment to the reporting device (WhiteLock), you can monitor the equipment 24/7, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
To prevent intruders and fires, wire alarm signals from infrared sensors and magnetic door sensors to the reporting device.
Do you have any of these concerns? - Security against intruders, theft, and fire for women living alone - This is your home. An intruder has been detected. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By wiring infrared sensors, magnet-type door sensors installed on windows, and alarm signals from smoke detectors to the reporting device (WhiteLock), it will notify you when the sensors detect something. *For more details, please check the materials by downloading the catalog. Feel free to contact us as well.
You can achieve remote monitoring of the water tank simply by wiring alarm signals from the water level gauge and blower to the reporting device.
Do you have any of these concerns? - When the motor pump (blower) stops operating, the air supply to the tank ceases, putting the farmed fish in a state of oxygen deprivation. - If this condition persists for a certain period, the farmed fish will die. - Additionally, immediate action is required in the event of a malfunction of the cold water chiller (cold water circulation device) or hot water chiller (hot water circulation device) that controls water temperature. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals from water level gauges, dissolved oxygen concentration meters, blowers, and circulation devices to the reporting device (WhiteLock), remote monitoring of the tank can be achieved 24 hours a day, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
There is a risk of blade damage and fire accidents occurring in order to ensure public safety.
Do you have any of these concerns? - Wind power generation is often susceptible to lightning strikes, which can lead to blade damage and fire accidents. - From the perspective of ensuring public safety, it is important to install lightning detection devices on wind turbine equipment. The reporting device (WhiteLock) fundamentally resolves these issues. ◇ By simply wiring the alarm signals from the lightning detection device to the reporting device (WhiteLock), you can remotely monitor wind power generation 24 hours a day, 365 days a year. ◇ The alarm signals can also be transmitted using specific low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
For preventing vandalism of vending machines, connect alarm signals from vibration sensors and impact sensors to the reporting device.
Do you have any of these concerns? - Preventing vandalism of vending machines at night - This is a vending machine. The vibration sensor has detected something. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By wiring alarm signals from vibration sensors and impact sensors to the reporting device (WhiteLock), it will notify you when the sensors detect something. ◇ The alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us as well.
For remote monitoring of temperature anomalies, we monitor the temperature of food and pharmaceuticals that require a constant temperature 24 hours a day.
Do you have any of these concerns? - Remote monitoring of temperature abnormalities in refrigeration and freezing units - This is freezer A. A high-temperature alarm has been triggered. The notification device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals (temperature, humidity, power outage, malfunction) from the refrigeration and freezing units to the notification device (WhiteLock), you can monitor the temperature of food and pharmaceuticals that require a constant temperature 24 hours a day. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
To prevent theft of the offering box, an infrared sensor is installed on the top of the offering box to detect suspicious individuals at night and report them.
Do you have any of these concerns? - Preventing theft of offering boxes - This is ● Shrine. The sensor has detected something. The reporting device (WhiteLock) fundamentally solves these issues. ◇ An infrared sensor is installed on top of the offering box to detect suspicious individuals at night and report them. ◇ By wiring the alarm signal from the infrared sensor to the reporting device (WhiteLock), it will notify you when the sensor detects something. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us as well.
It is simply a matter of wiring the alarm signals output from the control panel inside the automatic payment machine to the reporting device for issues such as running out of change or malfunctions.
Do you have any of these concerns? - Out of change. - Change shortage or gate malfunction. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring the alarm signals (out of change, malfunction) output from the control panel of the automatic payment machine installed in coin parking (unmanned parking lot) to the reporting device (WhiteLock), you can monitor the automatic payment machine 24 hours a day, 365 days a year. ◇ The alarm signals can also be transmitted using specific low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
When a signal (malfunction or power outage) is received from the water pump due to pump failure or leak warning, it will notify you of that signal.
Do you have any of these concerns? - There is a need to notify about pump failure alarms and water leakage alarms. - When a signal (failure or power outage) is received from the water supply pump, it will notify you of that signal. Our equipment fundamentally resolves these issues. ◇ When a signal (failure or power outage) is received from the water supply pump, it will notify you of that signal. ◇ Additionally, you can remotely turn the watering system ON/OFF. *For more details, please refer to the materials by downloading the catalog. Feel free to contact us as well.
Detects and reports suspicious individuals at night. For preventing intruders, theft, and fires in orchards.
Do you have any of these concerns? - Prevention of intruders, theft, and fires in orchards - This is ●● Farm. We have detected an intruder. The notification device (WhiteLock) fundamentally solves these issues. ◇ By installing photoelectric sensors (beam sensors) at the four corners of the orchard, we can detect suspicious individuals at night and send alerts. ◇ If you wire the alarm signals from the photoelectric sensors (beam sensors) to the notification device (WhiteLock), it will send an alert when the sensors detect something. *For more details, please refer to the materials by downloading the catalog. Feel free to contact us as well.
It is necessary to inform about the danger of pedestrians, bicycles, and cars overturning during strong winds.
Do you have any of these concerns? - To ensure the safety of pedestrians, during strong winds, pedestrian and bicycle traffic will be halted for 10 minutes at an average wind speed of 10-15 m/s, and completely stopped at 15-25 m/s. - To prevent falls, it is important to take measures such as alerting pedestrians on-site. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring the alarm signals from the anemometer to the reporting device (WhiteLock), you can remotely monitor wind speeds on the bridge 24 hours a day, 365 days a year. ◇ The alarm signals can be transmitted using specific low-power radio to any location with a telephone line. *For more details, please refer to the materials available for download from the <Download Catalog> link. Feel free to contact us with any inquiries.
It is necessary to monitor water quality in order to prevent inadequately treated wastewater from being discharged at the factory.
Do you have any of these concerns? - If water exceeding discharge standards is released, the decline in corporate trust due to environmental pollution and health damage is a significant issue. - This is Factory A. A pH anomaly has occurred. The reporting device (WhiteLock) fundamentally resolves these challenges. ◇ By simply wiring the alarm signals output from each sensor (pH, turbidity, water level) and equipment (such as pumps) to the reporting device (WhiteLock), water quality can be monitored remotely 24/7, 365 days a year. ◇ The alarm signals can also be transmitted using low-power radio to any location with a telephone line. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
For remote monitoring of temperature, humidity, and water leakage, simply wire the alarm signals from various sensors in food factories and warehouses to the reporting device.
Do you have any of these concerns? - Remote monitoring of temperature, humidity, and water leaks in food factories and warehouses - This is Warehouse A. A temperature alarm has been triggered. The notification device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals (temperature, humidity, water leaks, flooding, power outages) from various sensors in food factories and warehouses to the notification device (WhiteLock), you can monitor remotely 24 hours a day, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
When the water level of the river rises and a signal is received from the water level sensor, it will notify the opening and closing of the sluice gate.
Do you have any of these concerns? - Remote monitoring of water levels and remote control of sluice gate operations at water gates. Our equipment fundamentally solves these issues. ◇ When the river water level rises and a signal is received from the water level sensor, it will notify you of that signal. ◇ Depending on the content of the signal, you can remotely operate contact outputs such as opening and closing the sluice gate. ◇ It can also be used for sluice gates in downstream rivers and agricultural water channels. ◇ You can remotely monitor and control water levels in rivers, etc., 24 hours a day, 365 days a year. *For more details, please refer to the materials available for download in the <Catalog>. Feel free to contact us with any inquiries.
By monitoring the rise and fall of water levels in rivers and agricultural waterways, it helps in responding to the opening and closing of sluice gates and drainage gates.
Do you have any of these concerns? - Responding to the opening and closing of sluice gates and weirs - This is Sluice Gate A. The water level has risen. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring the signal from the water level sensor to the reporting device (WhiteLock), you can remotely monitor the river's water level 24/7, 365 days a year. ◇ Alarm signals can also be transmitted to locations with telephone lines using specific low-power radio. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us as well.
To prevent the occurrence of selling electricity profit and loss, the longer the confirmation of module troubles or power conditioner stoppages is delayed, the more selling electricity profit and loss will occur.
Do you have any of these concerns? - Solar power generation is not maintenance-free. - This is Solar Power Plant A. A power outage has occurred. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply performing the necessary wiring from the power conditioner with a voltage-free contact to the reporting device, remote monitoring is possible 24 hours a day. ◇ Additionally, when a power outage occurs in an area that includes solar power generation, operations will stop. ◇ Power outage notifications are also possible, so early resumption of operations can be expected. * For more details, please refer to the materials available for download in the <Download Catalog>. Feel free to contact us with any inquiries.
Remote monitoring of barrier opening and closing failures: When a signal for a barrier opening and closing failure is received at the parking lot entrance toll booth, it will notify you of that signal.
Do you have any of these concerns? - Remote monitoring of barrier opening and closing failures at toll booths and remote control for forced barrier opening. Our equipment fundamentally solves these issues. ◇ It can send output signals for emergency barrier opening and closing in response to those signals. ◇ It provides remote monitoring and control of toll booth equipment 24 hours a day. *For more details, please view the materials by downloading the catalog. Feel free to contact us as well.
For remote monitoring of kerosene levels and malfunctions, simply wire the alarm signals from the kerosene boiler and sensors to the reporting device.
Do you have any of these concerns? - Remote monitoring of the kerosene boiler (oil water heater) for fuel level and malfunctions. - This is Boiler A. The fuel level is low. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By simply wiring alarm signals (fuel level, malfunctions) from the kerosene boiler (oil water heater) and sensors to the reporting device (WhiteLock), you can monitor the boiler's status 24 hours a day, 365 days a year. ◇ Alarm signals can also be transmitted using low-power radio to locations with telephone lines. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
In case of intrusion or fire prevention, the sensors installed in the villa or store will notify when detected.
Do you have any of these concerns? - Prevention of intrusions and fires at vacation homes or stores - This is a vacation home. An intruder has been detected. The reporting device (WhiteLock) fundamentally solves these issues. ◇ By wiring the alarm signals from infrared sensors installed in vacation homes or stores, magnet-type door sensors attached to doors, and fire alarms to the reporting device (WhiteLock), it will notify you when the sensors detect something. *For more details, please refer to the materials available for download from <Download Catalog>. Feel free to contact us with any inquiries.
For preventing intruders, theft, and fire inside the building: This is ● warehouse. An intruder has been detected.
Do you have any of these concerns? - Prevention of intruders, theft, and fire in nighttime warehouses and unmanned warehouses The reporting device (WhiteLock) fundamentally solves these issues. ◇ By wiring infrared sensors installed in nighttime warehouses or unmanned warehouses, and magnet-type door sensors attached to doors, as well as alarm signals from fire detectors to the reporting device (WhiteLock), it will notify you when the sensors detect something. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
